Reshape 2 Dry ~ Mini Kit

3 Garment Clothes Drying Rack

 

 

How to Use:

 

 

 

 

 

 

 

 

 

 

 

 

 

1. After the washing machine spin cycle take the garment and run the telescoping arms down each sleeve.

2. Connect each arm into the center connector and hang the garment on the over-the-door hook.

 

 

3. Finish by holding each side and lightly pulling out and down. This will give you a shaped and smooth result.

• CLOTHING DRIES SHAPED, SMOOTH & READY TO WEAR

NO SHOULDER BUMPS* The Mini Kit is designed for short sleeve shirts to relieve shoulder bumps caused by drying on standard hangers.

• ELIMINATES THE DRYER WEAR & TEAR OF YOUR CLOTHING & KEEPS PRINTED IMAGES LOOKING NEW The 3 drying hangers can be used with

the over-the-door hook on the back of any door or with an existing wall hook or

shower curtain rod.

• CASCADE HANGER TO HANGER * This feature saves on space when all 3 hangers

are hung one to another against the door or wall.

• 3 GARMENT DRYING HANGERS & OVER THE DOOR HOOK

 

 

Special Features:

 

1.  First garment and hanger hangs on the over the door hanger. Additional hangers cascade from one to the other.

2. Over the door hook

3. If you are limited on space the Mini Kit with its 22" arm length can be used with long sleeve as shown.

System Includes:

• Three specialty hangars

• One plastic over the door hanger

Suggestions for Absolute Best Results:

• Whether you hand or machine wash, always use the spin cycle to remove excess water.

• Place garment in dryer for 3 to 5 minutes or long enough for it to get warm. This will help to relax the garment fibers for a

   smooth finish. (Skip this step if garment is embellished with beads or studs.)

• Block the garment by holding it at the bottom corners and lightly pulling downward and outward.

• Using fabric softener in the rinse cycle can also help reduce wrinkles.